Neo like Socket370 Adapters perspectives!

Thrakath · Post by **Thrakath** » Thu Mar 02, 2006 2:11 pm

Saw some of them on ebay for a not to high pricing!
Whats possible with those one? Any 100Mhz FSB like 1GHZ Cellis (FCPGA) in dual mode after same mod like neo?Or is it necessary to do the voltage reg mod?

Thx Tobi

jaybird · Post by **jaybird** » Thu Mar 02, 2006 2:33 pm

1GIG Celerons will not run dual, only 533 and below!

Regards,

jaybird

Thrakath · Post by **Thrakath** » Thu Mar 02, 2006 2:55 pm

u know the reason for this? not dual able?whats the highest fsb and frequencie for PIII dual?

swampwater · Post by **swampwater** » Thu Mar 02, 2006 9:02 pm

Intel has disabled the SMP support of Coppermine and Tualatin Celerons on the chip. For the Mendocino Celerons, Intel had forgotten to disable the SMP support, hence the BP6 is able to run them in SMP mode.

Thrakath · Post by **Thrakath** » Fri Mar 03, 2006 4:39 am

and PIII? Highest possible?

jaybird · Post by **jaybird** » Fri Mar 03, 2006 11:43 am

PIII 1100E's, but their as rare as "hens' teeth!

I've got 1, burned out 1 two months ago, can't find another one, looking at eCO 850/256/100/1.75V units in the interum.

Got my 1100E's to run @ 110 FSB on the BP6 for 4 years but it seems that this was a freek!

KliK · Post by **KliK** » Fri Mar 03, 2006 3:12 pm

why don't you get the VP6 board form ABIT?! it also has dual CPUs support for P3s!!!

swampwater · Post by **swampwater** » Fri Mar 03, 2006 10:49 pm

jaybird wrote:PIII 1100E's, but their as rare as "hens' teeth!

I've got 1, burned out 1 two months ago, can't find another one, looking at eCO 850/256/100/1.75V units in the interum.

Got my 1100E's to run @ 110 FSB on the BP6 for 4 years but it seems that this was a freek!

That's sad to hear. I was looking for the 1100E myself, but I settled for 1000's instead. It's too bad my BP6 after mods didn't work

Still looking for a BP6 but they're hard to find now as well.