Johnny 5 at warp 9 and climbing, I DOOD IT!

Batch codes, RAM specs, BIOS settings, etc..
Post Reply
jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Johnny 5 at warp 9 and climbing, I DOOD IT!

Post by jaybird »

I am writting this from a modified BP6 running 2 1100E PIII @ 100 Mhz FSB!

Windows 98SE loaded fine, no problems.

However, I am having problems loading WIN2K PRO and SP4.

Will post pics and keep all posted!

regards,

jaybird
Dave Rave
G'Day Mate!
Posts: 894
Joined: Thu Sep 26, 2002 4:28 am
Location: Sydney Australia
Contact:

Post by Dave Rave »

that would be a lot of Win98SE using only one cpu
and Win2k trying to use two.
which, I think, would be mostly the extra load on the BX and the getting it cooled properly.
or extra extra properly.!!!
davd_bob
Confused
Posts: 1043
Joined: Fri Feb 13, 2004 2:30 am
Location: Houston, TX

Post by davd_bob »

Jay...
Does it boot W2K at 66FSB?
There are *almost* no bad BP6s. There are mostly bad caps.

No BP6s remaining
Athlon 2800
Sempron 2000
ViaCPU laptop with Vista.(Works great after bumping ram to 2Gig)
P-III 850@100
jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Post by jaybird »

Cannot boot into win2k @ 66mhz, says cpu configuration is incorrect.

Note: previous board (0.40, not 0.41 such as this one), did not give me this problem.

Will try and go back now that 0.40 board has been repaired and try again.

However, business rears its' ugly head and says I need to get something done to bring "income" into the house (oh my god! reality rears its' ugly head!).

To be continued :wink: !

Regards,

jaybird
Post Reply