Post your overclocking results!

Batch codes, RAM specs, BIOS settings, etc..
purrkur
Linux Guru
Posts: 687
Joined: Fri Dec 12, 2003 5:57 pm
Location: Sweden
Contact:

Post by purrkur »

I got a pair of 400's that I overclocked but I never really checked if they ran at 100MHz FSB. I always just left them at 75MHz FSB (450MHz) because I knew it would do just fine in terms of stability. I might try to do something with them again when I finish fixing up my latest BP6.
2x533MHz@544MHz, 2.0V
640MB PC100 memory
Realtek RTL-8139 NIC
Maxtor 6Y080L0 80GB hdd
Debian Linux stable with 2.4.8 kernel
jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Subject: over-clocking 366 Celerons'

Post by jaybird »

Rock solid @ 572 to 583 depending on room temps'

Dual 366's @ 594 Mhz w/low room temps (solid @ 65 Deg. F.)

However, browsers do not like anything above 572

Will go into Windowz @ 605 and run for 15 min or so.

Changes made:

Spire Whisper V cpu coolers w/Delta 80 mm fans (very noisy!)

Arctic Silver paste on CPU's and BX

Mini-Peltier and 'X386 cooling fan on BX chip set

To many "noisey" Delta case fans

Regards,

jaybird
Post Reply