wow where to begin...
ummmm just read through alot of these forums for yourself and also the articles on this site. there is a bios download section at:
http://www.bp6.com/board/dload.php?action=category&id=1
the faq section is here
http://www.bp6.com/board/viewforum.php?f=48
that should help you get on your way. if you have anything else in particular you wish to ask, then yeah just go ahead and do so in the relevant sections of the forum and we will give some specific advice and information
BP6 - Revision 1.0 => faster CPU possible?
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
ok find the RU bios flash (not sure where it is)
once you do that then we'll need to help you overclock (you need to adjust CPU voltages and stuff)
then we'll see about finding you some faster CPU's (466's seem to be the best to overclock without any mods)
or if you can or want to you can do what im going to do and modify your board and make it so you can run some P3's in there
Kuun
p.s. what is your mother language? i will try to get a translation of what i want to say so you can understand it better
once you do that then we'll need to help you overclock (you need to adjust CPU voltages and stuff)
then we'll see about finding you some faster CPU's (466's seem to be the best to overclock without any mods)
or if you can or want to you can do what im going to do and modify your board and make it so you can run some P3's in there
Kuun
p.s. what is your mother language? i will try to get a translation of what i want to say so you can understand it better
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
from what i've observed 466's have reached higher FSB speeds and are more stable at those speeds
i may be wrong.. correct me if i am
i may be wrong.. correct me if i am
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
my 366s cant get past 85mhz bus, it will post fine well up into the 100 range and windows appears to attempt to want to start, but well it never does.
then again i have not done any mods or anything with it nor increased the voltage to much, so well i dont know really. i guess i could decide now to push this board to its full limits (hopefully my poor server doesnt die)
then again i have not done any mods or anything with it nor increased the voltage to much, so well i dont know really. i guess i could decide now to push this board to its full limits (hopefully my poor server doesnt die)
oh
hhe well my 500's won't go further than 75MHZ
if i try to hit 80MHZ ... well they spaz out
Kuun
hhe well my 500's won't go further than 75MHZ
if i try to hit 80MHZ ... well they spaz out
Kuun
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit