BP6 and registered memory
BP6 and registered memory
Can anyone tell me if this board works with registered memory or not? I'm aware it has to be low density memory.
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
Welcome to BP6.Com, emorrow !
The BP6 manual does not say anything about registered verses non-registered RAM. The BX chipset will support this type of RAM but normally you only need registered RAM if you are using more than 3 sticks of memory or running a server. Registered RAM should work on the BP6.
Here's a good link about RAM and the BX chipset. It mentions the BP6!
Click Here
The BP6 manual does not say anything about registered verses non-registered RAM. The BX chipset will support this type of RAM but normally you only need registered RAM if you are using more than 3 sticks of memory or running a server. Registered RAM should work on the BP6.
Here's a good link about RAM and the BX chipset. It mentions the BP6!
Click Here
Recently I read that the BX should even support certain registered 512MB modules. That guy said the DIMMs had to be "stacked" DIMMs (32 chips, double height). Anybody ever heard about that?
BP6, RU BIOS, XP SP3, ACPI, 2x366@523(1,95V), Pentalpha HS + 1x 12cm fan @5V, 768MB, Powercolor Geforce 3, RTL8139D NIC, Terratec EWS64L, Samsung M40 80GB (2,5''), LiteOn CDRW