Now I'm not sure, are these "Tullie's" or Coppermine's?
They are a large die chip, 1.133/512/133/1.45 (not sure on voltage).
Regards,
jaybird
Search found 301 matches
- Tue Jun 06, 2006 2:49 pm
- Forum: Overclocking / CPU Database
- Topic: dual tullies on VP6?
- Replies: 14
- Views: 36070
- Tue Jun 06, 2006 2:25 pm
- Forum: Overclocking / CPU Database
- Topic: dual tullies on VP6?
- Replies: 14
- Views: 36070
dual tullies on VP6?
Will the 1.133/512/133/1.45 PIII's run dual on a VP6? Looks like they should.
Regards,
jaybird
Regards,
jaybird
- Mon May 08, 2006 10:17 am
- Forum: Overclocking / CPU Database
- Topic: Johnny 5 at warp 9 and climbing, I DOOD IT!
- Replies: 3
- Views: 18804
Cannot boot into win2k @ 66mhz, says cpu configuration is incorrect. Note: previous board (0.40, not 0.41 such as this one), did not give me this problem. Will try and go back now that 0.40 board has been repaired and try again. However, business rears its' ugly head and says I need to get something...
- Thu May 04, 2006 2:27 pm
- Forum: Overclocking / CPU Database
- Topic: Johnny 5 update
- Replies: 0
- Views: 28087
Johnny 5 update
I have for the present, gone back to the dual 366's, stricktly for stabilitys' sake (dual 366's @ 584). I believe the problem is the Version of the board (.41 Vs .40) not that this cannot be done with stability. I have a modified .40 board (the one I have been using is a modified .41), We will see, ...
- Mon May 01, 2006 9:37 am
- Forum: Overclocking / CPU Database
- Topic: Johnny 5 at warp 9 and climbing, I DOOD IT!
- Replies: 3
- Views: 18804
Johnny 5 at warp 9 and climbing, I DOOD IT!
I am writting this from a modified BP6 running 2 1100E PIII @ 100 Mhz FSB!
Windows 98SE loaded fine, no problems.
However, I am having problems loading WIN2K PRO and SP4.
Will post pics and keep all posted!
regards,
jaybird
Windows 98SE loaded fine, no problems.
However, I am having problems loading WIN2K PRO and SP4.
Will post pics and keep all posted!
regards,
jaybird
- Wed Apr 26, 2006 1:08 pm
- Forum: Hardware
- Topic: gf mx400 PCI totally incompatible with BP6?
- Replies: 12
- Views: 31557
- Tue Apr 25, 2006 9:29 am
- Forum: Overclocking / CPU Database
- Topic: Post your overclocking results!
- Replies: 26
- Views: 61162
Subject: over-clocking 366 Celerons'
Rock solid @ 572 to 583 depending on room temps' Dual 366's @ 594 Mhz w/low room temps (solid @ 65 Deg. F.) However, browsers do not like anything above 572 Will go into Windowz @ 605 and run for 15 min or so. Changes made: Spire Whisper V cpu coolers w/Delta 80 mm fans (very noisy!) Arctic Silver p...
- Mon Apr 24, 2006 8:08 pm
- Forum: Overclocking / CPU Database
- Topic: A last and final try for "Warp 9"
- Replies: 2
- Views: 17658
A last and final try for "Warp 9"
Well, I just received my "last" and final PIII 1100E chip, I cannot afford to continue along these lines its' either "sh-- or get off the pot" as my dad used to say, wish use luck! I'm going to be tearing things down tonight and hopefully back on line either tomorrow or Wednesday night at the latest...
- Mon Apr 24, 2006 10:29 am
- Forum: General Discussion
- Topic: Tips for noob
- Replies: 12
- Views: 21674
Hi Dave!
Interesting, since I installed the Spire Whisper V's, new mini-pelt on the bx and 80 mm Delta's my system temps have been well above the cpu temps: My board is the most stable of any BP-6 I have run to-date even though this board with mobo 5.0, Spires, new "mini-pelt" and 80 mm Delta's runs "hotter"...
- Thu Apr 20, 2006 10:28 am
- Forum: General Discussion
- Topic: Need an ISA card that runs WIN2K
- Replies: 11
- Views: 18362
Just as a personal note, I have beat the living h--l out of this mobo and it keeps coming back for more! I have delt with several different dual cpu mobo's over the years and, yes, this is "old technology". However, I have never seen a mobo as flexible as this guy is! And it keeps coming back for mo...
- Thu Apr 20, 2006 8:08 am
- Forum: General Discussion
- Topic: Need an ISA card that runs WIN2K
- Replies: 11
- Views: 18362
All is well!
All is well! Got my 3com ISA NIC yesterday, plugged it into ISA 2 and BAM!!!, BP6 and WIN2K saw card right away. Had to manually assign IRQ, re-boot and we are off and running. I now have: AGP. PNY GeForce FX5500 dual hd vid card PCI 1. WinTV GO! card PCI 2. Generic FireWire card PCI 3. Adaptec SCSI...
- Wed Apr 19, 2006 10:07 am
- Forum: Overclocking / CPU Database
- Topic: Johnny 5 at warp 7!
- Replies: 2
- Views: 16682
- Tue Apr 18, 2006 12:11 pm
- Forum: General Discussion
- Topic: Building a "new" box, need ideas pls! (video inten
- Replies: 2
- Views: 6967
Building a "new" box, need ideas pls! (video inten
If you had all the "spair parts" needed to build a new (dual cpu of course :wink: !) box and all you needed were the cpu's, mobo & memory and you had $500 to $1000 USD to "play" with, what would you build? Dual Xeon's? Dual AMD's? Any left-over cash to go towards a 265meg+ dual head vid card. Must b...
- Fri Apr 14, 2006 6:59 am
- Forum: Overclocking / CPU Database
- Topic: Ear plugs anyone?
- Replies: 1
- Views: 14850
Eye candy!
Up-loaded all new pics of Spire Whisper V + Delta fan conversion Vs. the old Global WIN FEP-32's and included some pic's of the "home office" :wink: As you can see, the old "mini-pelt" nolonger fits so I will be working on installing a new one (just bought 5 for $10 USD on eBay). Need two fan contro...
- Thu Apr 13, 2006 11:14 am
- Forum: Overclocking / CPU Database
- Topic: Ear plugs anyone?
- Replies: 1
- Views: 14850
Ear plugs anyone?
Yeah, I shudda known better, I now have a Boing 747 parked on my desk top :roll: I have re-installed the right side of the case and temps do not change, I need to re-install the left side of the case. However, my second (paralleled PS) PS is externally located and I need to make an opening some wher...
- Thu Apr 13, 2006 7:52 am
- Forum: Overclocking / CPU Database
- Topic: Johnny 5 at warp 7!
- Replies: 2
- Views: 16682
Johnny 5 at warp 7!
Just completed my latest up grade to my V0.41 board, replacing the old GlobalWIN FEP-32's with modified Spire Whisper V coolers. I found the coolers at Newegg for $4.99 + SH & HDLG (these have quiet low speed 27 cfm fans), found 5 Delta 80mm 47 cfm fans for $10 + SH & HDLG on eBay and swapped everyt...
- Wed Apr 12, 2006 9:04 am
- Forum: General Discussion
- Topic: Need an ISA card that runs WIN2K
- Replies: 11
- Views: 18362
- Tue Apr 11, 2006 6:32 am
- Forum: General Discussion
- Topic: Need an ISA card that runs WIN2K
- Replies: 11
- Views: 18362
DUH, guess I shudda said "WHICH" card ;) ! I need an ISA NIC that will support WIN2K, haven't been able to find such a beast. Problem is if I use a PCI card then, because I have all but one PCI slot full: AGP, FX5500 PCI 1, WinTV GO! PCI 2, 10/100 NIC PCI 3, Adaptec SCSII for scanner PCI 4, Chaintek...
- Mon Apr 10, 2006 2:02 pm
- Forum: General Discussion
- Topic: Need an ISA card that runs WIN2K
- Replies: 11
- Views: 18362
Need an ISA card that runs WIN2K
I'm trying to find an ISA card that works with WIN2K, any ideas or ?
Regards,
jaybird
Regards,
jaybird
- Sun Apr 09, 2006 7:25 am
- Forum: Overclocking / CPU Database
- Topic: Overclocking - (voltage) temp = stability, TNX Dave!
- Replies: 9
- Views: 28969
I have two BP6's that I "play" with, one is a r .40, the other is a r .41, both exhibit the same problems and no bulging caps. Both will go 550 to 583 with the same proc's, both show same temps and both "slow down" as the room heats up. Changed one fan yesterday and removed the other side of the cas...
- Sat Apr 08, 2006 3:45 pm
- Forum: Overclocking / CPU Database
- Topic: Overclocking - (voltage) temp = stability, TNX Dave!
- Replies: 9
- Views: 28969
Shore! :) Newegg was the "source" for the Whisper V ($4.99+ S&H) EBay for the 80mm 41cfm fans (5 for $10.00 USD) EBay for the "mini-peltiers"(5 for $10 USD)+ S&H Just got to watch EBay! ;) As far as the "tests" are concerned, anybody can do a "socket 370 cpu cooler test" search on msn. I believe it ...
- Sat Apr 08, 2006 10:29 am
- Forum: Overclocking / CPU Database
- Topic: Overclocking - (voltage) temp = stability, TNX Dave!
- Replies: 9
- Views: 28969
Yeah I know, however, I cannot close up my case because it is full to the top and I added a second power supply just for the mobo and it is paralleled with the on-board PS - NO ROOM ! Wiring does not allow me to close case :( ! I just reversed on of the large (120mm) fans blowing what I thought was ...
- Fri Apr 07, 2006 11:14 am
- Forum: Overclocking / CPU Database
- Topic: Overclocking - (voltage) temp = stability, TNX Dave!
- Replies: 9
- Views: 28969
Humm, interesting, I cannot get my system to overclock @ 1.9 volts. However, I did notice that my "case Temp" was well above my "cpu" temps as shown in MBM 5.0? Fans are blowing down on cpu's, not "out or up", maybe need to reverse fans? Also have a 120mm fan blowing outside air into the case (side ...
- Thu Apr 06, 2006 11:00 am
- Forum: Overclocking / CPU Database
- Topic: Overclocking - (voltage) temp = stability, TNX Dave!
- Replies: 9
- Views: 28969
Overclocking - (voltage) temp = stability, TNX Dave!
Following a tip from Dave Rave, I tried reducing the core voltage to my dual 366's @ 550 (was running @ 2.10) tried 2.00, no-go, system crashed, went to 2.05 and BAM! not only 550 but 572 & 584!, this time stable both on and off-line! Core temps as reported by MBM 5.0 dropped almost 10 deg F.! Howev...
- Wed Apr 05, 2006 2:43 pm
- Forum: General Discussion
- Topic: Tips for noob
- Replies: 12
- Views: 21674
235 is a bit small IMHO, sould use nothing less than 300 W and a BRAND NAME PS! I presently am using 2 PS in tandom (see this website under "articles"), a 300 W unit just for the board and a 450 W unit for all else. Why? and what good did it do? I am runnig dual 366's @ 106fsb perfectly stable on th...