Weird HPT366 problem

Peripherals, parts, data storage...
Post Reply
jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Weird HPT366 problem

Post by jaybird »

I desided to (one more time!) revive one of my BP6's. With 2 366's @ 66mhz, a vid card installed, 1 stick PC133 SDRAM (256meg), one hard drive and 2 daisy chained optical drives on (IDE-1 & IDE-2) plus a 3COM ISA NIC I installed WIN98SE and WIN2K Pro, dual-boot.

All went well until I tried to install the HPT drivers (1.28 BIOS, 1.25.1 drivers for WIN2K, has worked well for me before). WIN98SE works just fine with its' HPT drivers and a hard drive on IDE-3 & 4.

I can hook up 2 drives, one to each to IDE-3 and IDE-4 on the HPT controller in WIN98SE.

However, when I load the WIN2K 1.25.1 drivers it says all is ok but I get a BSOD on IDE-3.

I can hook up #1 hard drive ( my OS drive) on IDE-4 but if I try to slave my 60 gig NTFS empty video capture drive to the master on IDE-4 I get another BSOD?

Ideas, thoughts anyone?

Regards,

jaybird
hyperspace
Board Admin
Posts: 1395
Joined: Wed Jul 24, 2002 7:39 am
Location: Lincoln, NE USA
Contact:

Post by hyperspace »

Have you tried "cable select" on the drives?
Quantum WormHole

Image
lost in hypertime...
jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Post by jaybird »

Yep!, no-go.

I am re-formatting and reloading OS's because BSOD said it couldn't fined "boot device" in win2k with hard drive on 80 pin cable and on IDE-3.

Works great in win98se with same setup, cable(s) and hdd settings.

May have to do a low-level format.

Regards,

jaybird
jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Problem solved!

Post by jaybird »

Looks like something got scrambled in the boot sector for WIN2K. After re-formating and reloading all is well (again!).

Regards,

jaybird
Post Reply