problems with hangs...

OS / Drivers / BIOS
Post Reply
KliK
Posts: 350
Joined: Fri Mar 11, 2005 3:56 pm
Location: Zagreb, Croatia
Contact:

problems with hangs...

Post by KliK »

so how do i fix it?

i have a 2x433 cel on bp6 unmodded board...big cooler on procs, and one on the chipset...RV BIOS and 1.28 HPT bios with 1.25.0.10 driver for HPT366...
after installing windows XP pro SP2, it just works great...formats the drive, copies the files...and then it just hangs in configuration about 8 to 9 minutes before finishing...

how i fix that?
the drive is on HPT366 adapter IDE3 controler...
hyperspace
Board Admin
Posts: 1395
Joined: Wed Jul 24, 2002 7:39 am
Location: Lincoln, NE USA
Contact:

Post by hyperspace »

Try installing with the hard drive connected to IDE1 (or 2) and then moving the hard drive over to IDE3.
Quantum WormHole

Image
lost in hypertime...
KliK
Posts: 350
Joined: Fri Mar 11, 2005 3:56 pm
Location: Zagreb, Croatia
Contact:

Post by KliK »

hyperspace wrote:Try installing with the hard drive connected to IDE1 (or 2) and then moving the hard drive over to IDE3.
tried that, but it's still hangs at 8-9 minutes before finish...
KliK
Posts: 350
Joined: Fri Mar 11, 2005 3:56 pm
Location: Zagreb, Croatia
Contact:

Post by KliK »

seems like only replacing the EC10 with 1500 would do the job...and it is stable enough!
though i have to run only at speeds 433@442...higher is unstable still...and LM338T cannot be found anywhere!
:)
Post Reply