CMOS discharging ?

OS / Drivers / BIOS
Post Reply
hyperspace
Board Admin
Posts: 1395
Joined: Wed Jul 24, 2002 7:39 am
Location: Lincoln, NE USA
Contact:

Post by hyperspace »

Shutdown computer.

Turn off power on the power supply and unplug the power cord.

Moved the jumper from pins 1-2 to pins 2-3. Leave it on pins 2-3 for 30 seconds then move it back to pins 1-2.

Plug in the power cord and turn on the power supply. Start up computer.

This is the way I do it.
Quantum WormHole

Image
lost in hypertime...
vgoraz
Posts: 97
Joined: Sun Oct 13, 2002 2:39 pm
Contact:

Post by vgoraz »

or you could with the side of your case off yank out the jumper, put it on pins 2-3, computer will now be off, then pull it out again put it on pins 1-2 and computer will then turn back on. or something like that. actually i think i lost the jumper and have nothing in any of the pins
Post Reply