need help changing fsb - discombobulated!!!!!

OS / Drivers / BIOS
Post Reply
nullshark
Posts: 86
Joined: Sun Aug 11, 2002 3:14 pm
Location: Edmonton, Alberta, CANADA

BIOS setting causing your error

Post by nullshark »

Changing "Speed Error Hold" to OFF will get rid of that error.
On a torpedo to Hell
ASRock 939 Dual Sata II mobo--2x 2200+--2GB RAM--ATI x800XL--2x Seagate Cheetah 15K.3s on LSI 20160 HBA--WD 400GB Caviar RE2, Maxtor 300GB, 3x Maxtor 120+ GB = 1.1TB storage--Sony Dru-820A DVDRW--Diamond Xtreme 7.1 sound--Win XP
Top
hyperspace
Board Admin
Posts: 1395
Joined: Wed Jul 24, 2002 7:39 am
Location: Lincoln, NE USA
Contact:
Contact hyperspace

Post by hyperspace »

A 500 MHz Celeron will not overclock very high. Celerons max-out at ~ 600 Mhz. The 300A or 366 Celeron will overclock to 100-110 Mhz FSB. You can try more cooling for the 500's but it may more effort than what it is worth.
Quantum WormHole

Image
lost in hypertime...
Top
g0fvt
Posts: 110
Joined: Mon Jul 29, 2002 3:32 pm
Location: Hertfordshire UK

Post by g0fvt »

just a small point... your 500s have a fixed multiplier of 7.5, altering the multiplier in bios will not change it.... btw 7.5 times 72 is 540Mhz.. about as far as you'd expect to get... a bit more extreme cooling may see you get a bit higher.... BIOS reports clockspeed from a look up table so sometimes gets it wrong!
Top
Post Reply

Return to “Software”