2 Celeron 366@550 possible ??

[vgoraz]

no. lower your fsb to make them both run at 533 or something lower than what you have and it will eventually work

[g0fvt]

One of the big features of the BP6 is it's ability to be adjusted fairly finely, go into BIOS setup and you can increment the clockspeed..... your 366 cpus have a fixed internal multiplier of 5.5..... as a start you could try something like 92Mhz fsb which would give you just over 500Mhz...

You may need to up the voltage a tad, maybe 2.1 or 2.2, beware of overheating your cpus... be wary of fsbs in the 80 to 92Mhz region as the PCI bus gets the rats, depending on the cards you are using....

Good luck with it... 100Mhz fsb has been achieved by many people with aircooled 366s..