my next project. WCing
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
my next project. WCing
gonna be starting a water cooling project on my BP6. found some ThermalTake waterblocks that are right at the same base size as the Glabal Wins, just have to make a mount for them. and a northbridge block that looks to mount perfectly. ill just have to figure out how to cool two processors without heating the second {thinking "Y" connectors}.
might take a while to build but ill keep a log and hopefully pics to.
might take a while to build but ill keep a log and hopefully pics to.
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
$60 +s/h at TigerDirect.com for CPU. and $50 for north bridge at scorptec.com
though i found some Koolance blocks that are the same size and have an application for the coppermine for around the same price. ill see if i cant get a link up for them later.
though i found some Koolance blocks that are the same size and have an application for the coppermine for around the same price. ill see if i cant get a link up for them later.
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
ok been updating my plans on this system so here we go
Koolance cpu waterblocks and have socket 370 clips included {Score}
Koolance NorthBridge block
Koolance Pump and Res
ThermalTake Rad/Fan {120mm fan 39~93cfm}
tubing is something ill decide at ordering time, and going Blue UV coolant.
thoughts anyone? Suggestions? or a "hey you suck"?
Koolance cpu waterblocks and have socket 370 clips included {Score}
Koolance NorthBridge block
Koolance Pump and Res
ThermalTake Rad/Fan {120mm fan 39~93cfm}
tubing is something ill decide at ordering time, and going Blue UV coolant.
thoughts anyone? Suggestions? or a "hey you suck"?
Hey, you suck!tenchimuyo93 wrote:thoughts anyone? Suggestions? or a "hey you suck"?
j/k. Keep us posted, and hope it all goes well!
Like BP6.com? Not a member?
Then why the hell not? It's great!
-> BP6.com Membership <-
Then why the hell not? It's great!
-> BP6.com Membership <-
why don't you use the big aquarium or just a big plastic barrel for the cooling? that will be enough...and the pump you use can be fitted with 110V/220V - that don't consume your PSU power!tenchimuyo93 wrote:ok been updating my plans on this system so here we go
Koolance cpu waterblocks and have socket 370 clips included {Score}
Koolance NorthBridge block
Koolance Pump and Res
ThermalTake Rad/Fan {120mm fan 39~93cfm}
tubing is something ill decide at ordering time, and going Blue UV coolant.
thoughts anyone? Suggestions? or a "hey you suck"?
![Very Happy :D](./images/smilies/icon_biggrin.gif)
also, are those TT radiator/fan TC or with the resistor?
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
the pump/res im gonna use has tmermal controls for your fans {3pin} and has temp sensors in the water and a few that you put on your board/waterblocks. plus what really sold me on it was the abilty to shut down your comp if temp hits a certain level {adjustable, default is 60C}.
or if you just want a thermal controled fan the ThermalTake Smart Fans can run 100%, rheostat, or thermal. the 80mm {linked above} max out at 75.70CFM@48dB
the 120mm are like 90CFM.
or if you just want a thermal controled fan the ThermalTake Smart Fans can run 100%, rheostat, or thermal. the 80mm {linked above} max out at 75.70CFM@48dB
the 120mm are like 90CFM.
that is nice...tenchimuyo93 wrote:the pump/res im gonna use has tmermal controls for your fans {3pin} and has temp sensors in the water and a few that you put on your board/waterblocks. plus what really sold me on it was the abilty to shut down your comp if temp hits a certain level {adjustable, default is 60C}.
or if you just want a thermal controled fan the ThermalTake Smart Fans can run 100%, rheostat, or thermal. the 80mm {linked above} max out at 75.70CFM@48dB
the 120mm are like 90CFM.
but i'm going for the external 60liters plastic tank, with AC pump with several settings...'cause it will coll down not one, but 3-4 computers in my room!
that is why i ask now and gather data...'cause the rad/fan has to be controlled by thermal resistor...but those TT SF would work fine!
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
boy you sure know how to keep us hanging..
those links are nice..
im looking at them for a wartercooling project im thinking of doing myself..
hope everything worked out
those links are nice..
im looking at them for a wartercooling project im thinking of doing myself..
hope everything worked out
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
-
- Posts: 80
- Joined: Mon Oct 16, 2006 11:04 pm
- Location: currently Lockhart TX
- Contact:
ok small update to thsi long drawn out project of mine {time is hard to get for this}. got a Antec 900 case for my system today and installed the current setup. this case droped my system/hdd temp by about 5~7C {idle and loaded}.
also got 2 60mm to 80mm adapters to run 2 TT 80mm smartfans on the Global Wins. currently running them at 50% speed and same cooling effect as the 60mm at 100%.
ill have pics later as im just to tired to take them right now.
ok here are the images i have at current
case closed {flash}
case open {flash}
case closed {no Flash}
also got 2 60mm to 80mm adapters to run 2 TT 80mm smartfans on the Global Wins. currently running them at 50% speed and same cooling effect as the 60mm at 100%.
ill have pics later as im just to tired to take them right now.
ok here are the images i have at current
case closed {flash}
case open {flash}
case closed {no Flash}