Neo like Socket370 Adapters perspectives!

Batch codes, RAM specs, BIOS settings, etc..
Post Reply
Thrakath
Posts: 25
Joined: Thu Feb 09, 2006 4:52 pm
Contact:

Neo like Socket370 Adapters perspectives!

Post by Thrakath » Thu Mar 02, 2006 2:11 pm

Saw some of them on ebay for a not to high pricing!
Whats possible with those one? Any 100Mhz FSB like 1GHZ Cellis (FCPGA) in dual mode after same mod like neo?Or is it necessary to do the voltage reg mod?

Thx Tobi

jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Post by jaybird » Thu Mar 02, 2006 2:33 pm

1GIG Celerons will not run dual, only 533 and below!

Regards,

jaybird

Thrakath
Posts: 25
Joined: Thu Feb 09, 2006 4:52 pm
Contact:

Post by Thrakath » Thu Mar 02, 2006 2:55 pm

u know the reason for this? not dual able?whats the highest fsb and frequencie for PIII dual?

swampwater
Posts: 15
Joined: Sun Apr 03, 2005 5:51 pm

Post by swampwater » Thu Mar 02, 2006 9:02 pm

Intel has disabled the SMP support of Coppermine and Tualatin Celerons on the chip. For the Mendocino Celerons, Intel had forgotten to disable the SMP support, hence the BP6 is able to run them in SMP mode.

Thrakath
Posts: 25
Joined: Thu Feb 09, 2006 4:52 pm
Contact:

Post by Thrakath » Fri Mar 03, 2006 4:39 am

and PIII? Highest possible?
BP6 Ver.1.0 Caps Replaced EC10->2200µF
2xCeleron 500@68Mhz FSB
384MB PC133 SDRAM ;-)

jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Post by jaybird » Fri Mar 03, 2006 11:43 am

PIII 1100E's, but their as rare as "hens' teeth!

I've got 1, burned out 1 two months ago, can't find another one, looking at eCO 850/256/100/1.75V units in the interum.

Got my 1100E's to run @ 110 FSB on the BP6 for 4 years but it seems that this was a freek!

KliK
Posts: 350
Joined: Fri Mar 11, 2005 3:56 pm
Location: Zagreb, Croatia
Contact:

Post by KliK » Fri Mar 03, 2006 3:12 pm

why don't you get the VP6 board form ABIT?! it also has dual CPUs support for P3s!!! :D

swampwater
Posts: 15
Joined: Sun Apr 03, 2005 5:51 pm

Post by swampwater » Fri Mar 03, 2006 10:49 pm

jaybird wrote:PIII 1100E's, but their as rare as "hens' teeth!

I've got 1, burned out 1 two months ago, can't find another one, looking at eCO 850/256/100/1.75V units in the interum.

Got my 1100E's to run @ 110 FSB on the BP6 for 4 years but it seems that this was a freek!
That's sad to hear. I was looking for the 1100E myself, but I settled for 1000's instead. It's too bad my BP6 after mods didn't work :(

Still looking for a BP6 but they're hard to find now as well.

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests