Fastest CPU

Batch codes, RAM specs, BIOS settings, etc..
Post Reply
RRLedford
HPT IS EVIL!
Posts: 604
Joined: Wed Jul 24, 2002 11:15 pm
Location: Chicago USA

Post by RRLedford »

The PPGA Celeron-1/533MHz running @66MHz FSB is the fastest chip that Intel produced to match the ABIT CPU specs for the BP6.
The best performance using overclocking of the FSB speed will result from the 366MHz version of this Celeron, as these CPUs can usually reach 100MHz FSB speed, giving a CPU clock of ~550MHz & much improved speed for moving data between the RAM & CPU(s).
Zero point energy
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

you can Modify the motherbaord and get a 1.4ghz celeron tualatin core cpu to work with some adapters
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

spinakar..

HD ram is single sided SDRAM it is also a little different in the way data is stored on it

it is in fact unusable.. you have 512 and it will only register as 256

and yes 768MB ram is the max amount of ram that can be used in the BP6

BTW.. voltage DOES matter when it comes to multilayered motherboards.. in general electronics it doesn't... but the values must be exact when it comes to precise electronics such as micro devices and motherboards (multilayered PCB's)

1500Mfd caps can be found on www.digikey.com

emai la rep and tel lthem the cap your looking for and they will email you with a p/n to match
i had some p/n's but i lost them awhile back
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

have you tried swapping out the ram?

do you have any other buldged or leaking caps?

a 36v cap as compared to a 6.3v is a HUGE difference.... 10V would be pushing it but it might work...

have you tried multiple cpu's ? it won't do anything if the cpu is fried.. it'll just sit there like a lump on a log...

Kuun
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

ok.. dude

if the CPU is dead it cannot process any bios info.. so if the cpu is dead you get no beeps
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
Post Reply