Fastest CPU thats stable in a BP6 using a Lin-Lin converter?

Batch codes, RAM specs, BIOS settings, etc..
Post Reply
the_flames
Posts: 106
Joined: Thu Oct 10, 2002 11:50 am
Location: Yorkshire UK
Contact:

Fastest CPU thats stable in a BP6 using a Lin-Lin converter?

Post by the_flames »

whats the fastest CPU, thats stable, in a BP6 using a Lin-Lin converter in a single CPU configuration, that someone has tryed and tested?
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

the 1.4ghz celeron tualatin core
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

i havent used a lin-lin

but look in cpu database thread and look through the several posts that contain lin lin info
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

hehehe

well it has been tried and tested :P just not by me.... yet

good luck with the lin lin mate
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
dazling69
Posts: 1
Joined: Sun Dec 07, 2003 6:28 pm

lin-lin adaptor

Post by dazling69 »

I have an 'out the packet' standard BP6 Motherboard with dual 533 celerons, I recently try to run a 900 celeron (CUmine) with a Lin-Lin adaptor (set up via jumper setting in the lin lin setting advice on this web site) and it didn't fire up in either slot. (however by putting this a dell gx1 using a slocket it did fire up) I then upgraded the bios to the roby one, again no luck. Do I need to modify my motherboard to get this to work??
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

i believe you may need to do the p3 mod where you put a wire between to pins on the bottom of the mobo
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
Post Reply