"and it was like beep beep...."

Batch codes, RAM specs, BIOS settings, etc..
Post Reply
onelegdis
Posts: 274
Joined: Thu Jul 25, 2002 6:52 pm
Location: London UK

Post by onelegdis »

Check your memory is ok and seated correctly. Also check your graphics card.
Derek
Site Admin
Posts: 2489
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek »

motherbored wrote:tried 3 different sticks, two 128's (100MHz) and a 32 (66MHz) all by themselves, each time in a different slot. AGP Card is solid in the slot. Any more ideas? I failed to mention the bios error: "CPU is unworkable or has been changed. Please Recheck - CPU SOFT MENU" I'm running Memtest86 now to see if it's the memory.
Are you overclocked at all? Go into the BIOS and under CPU SOFT MENU disable "Speed Error Hold". This will (hopefully) rectify the "CPU Is Unworkable" error.
hyperspace
Board Admin
Posts: 1395
Joined: Wed Jul 24, 2002 7:39 am
Location: Lincoln, NE USA
Contact:

Post by hyperspace »

motherbored wrote:
Derek wrote:Are you overclocked at all? Go into the BIOS and under CPU SOFT MENU disable "Speed Error Hold". This will (hopefully) rectify the "CPU Is Unworkable" error.
Even if I am overclocked, it sets the processors back to 400 MHz. I dunno. Gonna try flashing the BIOS next.
/fingers crossed
Disabling Speed Error Hold in the BIOS should resolve this issue.
Quantum WormHole

Image
lost in hypertime...
Post Reply