Abit BP6 + 1xCeleron Tualatin 1400@1484
ok....
whatever adapter he has... i want 4
2 for each BP6 and im bound and determined to make myself bankrupt getting dual 1.4GHZ cpus to work SMP in a old board such as the BP6
Kuun
whatever adapter he has... i want 4
2 for each BP6 and im bound and determined to make myself bankrupt getting dual 1.4GHZ cpus to work SMP in a old board such as the BP6
Kuun
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
RRLedford
Did you ever get your supplies you bought? Very curious about yoru findings
And are these the adapters?
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... gory=41993
Did you ever get your supplies you bought? Very curious about yoru findings
And are these the adapters?
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... gory=41993
Yes, these are the adapters I got for $13. Haven't tried them on the BP6 yet. I've had some major problems with my (2) ACORP Dual P3 boards. They will not clock the Tualatin CPUs faster than 100MHz with adapters. No matter what I do I can't get them to boot with FSB running in the proper 133-166 range. The FSB speed jumper is ignored - I even got (2) 256MB PC150 DIMMs hoping the memory speed detect would stop locking in on 100MHz - no help. I'm about to bail on them & just use my Coppermine 1100E's on them. Pay $40 for a board & you get a $40 board!gabumon wrote:RRLedford
Did you ever get your supplies you bought? Very curious about yoru findings
And are these the adapters?
http://cgi.ebay.com/ge ws/eBayISAPI.dll?ViewItem&item=2724647843&category=41993
-
- SETI Guru
- Posts: 246
- Joined: Wed Jul 24, 2002 7:11 pm
- Location: Bloomfield, NJ U.S.A.
- Contact:
I bought two of those adaptors for pga to fcpga & fcpga to fcpga2. Stacking them worked just fine. I plugged my 1.4Ghz P3 into an old BX based board. I could not enter the bios or do anythign other then see the post screen that listed the speed at o498, yes an o and a zero, and ?.?? for the vcore.
So you can see a few pics here
I think I'm off to see if I can get my 1.4 to work in my webserver now.
So you can see a few pics here
I think I'm off to see if I can get my 1.4 to work in my webserver now.
-
- SETI Guru
- Posts: 246
- Joined: Wed Jul 24, 2002 7:11 pm
- Location: Bloomfield, NJ U.S.A.
- Contact:
These adaptors are good for SMP. At least a single adaptor going from fc-pga to fc-pga2.HAL6000 wrote:I bought two of those adaptors for pga to fcpga & fcpga to fcpga2. Stacking them worked just fine. I plugged my 1.4Ghz P3 into an old BX based board. I could not enter the bios or do anythign other then see the post screen that listed the speed at o498, yes an o and a zero, and ?.?? for the vcore.
So you can see a few pics here
I think I'm off to see if I can get my 1.4 to work in my webserver now.
The board I'm using, an asus cur-dls, only offers auto detection of the bus and it will only do 100mhz with then 1.4Mhz in the board It is running alonge side a 1Ghz P3, currently at 750Mhz.
Any of you guys that do bios stuff want to tweak a bios for this board for me? It lists the CPU as a Pentium II 1066Mhz chip on booting.
aha....I left the neo jumped at 100 and the lin lin jumped for a fcpga to fcpga 2 which is the way it was jumped when I got it.... I will try jumping the neo to 133 and leaving the lin lin as is. If it is not too much touble would you mind taking a picture of the jumpers on your lin lin and posting it.
PS thanks for responding I appreciate it.
Thanks Todd
PS thanks for responding I appreciate it.
Thanks Todd
xrebycse: I have a 1.4GHz celeron tualatin, and I'm using it overclocked at 1540MHz, with a 110MHz bus. I'm not using 133Mhz, because my video board don't boot at this clock. Only my Neo is jumpered to 133MHz.
harker: yes, I have no mods in my BP6, only a fan attached to the chipset heatsink
Perhaps I'm a lucky guy and only this celeron work with the adapters?
I just made this mod in another BP6 (using the same adapters and cpu), and it works perfectly too. I believe that the another BP6 is revision 1.1. Another hypothesis: which socket you are using? I use the left one, which is close to the keyboard connector.
harker: yes, I have no mods in my BP6, only a fan attached to the chipset heatsink
Perhaps I'm a lucky guy and only this celeron work with the adapters?
I just made this mod in another BP6 (using the same adapters and cpu), and it works perfectly too. I believe that the another BP6 is revision 1.1. Another hypothesis: which socket you are using? I use the left one, which is close to the keyboard connector.
Hi yoshihiro,
I went to intels site to look up your cpu vs mine. mine is a sl68p yours is a sl64v per your picture. I can't find yours on their website. see
http://processorfinder.intel.com/script ... selections
Does your 2nd upgrade cpu have the same s spec number? if not what is it?
Thanks
I went to intels site to look up your cpu vs mine. mine is a sl68p yours is a sl64v per your picture. I can't find yours on their website. see
http://processorfinder.intel.com/script ... selections
Does your 2nd upgrade cpu have the same s spec number? if not what is it?
Thanks
where can i get a lin-lin adapter?
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
I might have one for sale if I can't get this to work. One of the earlier posts has a link I believe to a site that sells them
here is the site......and as yoshihiro indicates I got mine on ebay
http://www.hardwarecooling.com/product_ ... cts_id/199
here is the site......and as yoshihiro indicates I got mine on ebay
http://www.hardwarecooling.com/product_ ... cts_id/199
Last edited by harker on Sat May 10, 2003 2:03 pm, edited 1 time in total.
Harker: My processor is OEM, I cannot locate info about it in intel's site either, but in google I found references for it: http://www.intel.com/design/celeron/spe ... 374847.pdf
I have only one processor, I used the same in the two boards, but I'm thinking about buying another one to solve this doubt.
kuun: you can find in ebay, just do a search for "tualatin"
I have only one processor, I used the same in the two boards, but I'm thinking about buying another one to solve this doubt.
kuun: you can find in ebay, just do a search for "tualatin"
ok cool
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit