Seeking CPU's

For sale ads / Stuff wanted ads
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Seeking CPU's

Post by kuun »

i am a fanatical CPU collector

i have the following,
Intel:
Dx 25
Dx2 50
Dx3 75
Sx 33
Sx2 66
Pentium 90
Pentium 120
Pentium 150
Pentium 166MMX
Pentium 200MMX
Pentium 233MMX
Pentium Pro 180
Pentium 2 Celerons (4x) 500
AMD:
Amd 5x86 133
K6-2 500
Cyrix:
Cyrix 166

as you can tell i mostly have Intel Cpu's, they are the most abundant to me, but i do have a very old AMD cpu, the K5 :) thats my favorite piece,

anyhow im looking for the P2 300-450 chips
any of the PPRO or XEON cpu's <-- these i will pay for.. i am desperate for a XEON cpu
any of the AMD line (Working cpu's only, my k6-s 500 does not work (core meltdown from overheat while overclocking(not done by me)))
Any of the Cyrix cpu's
and any cpu's that are old and rare

Kuun
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

I have an amd k62- 350 cpu that hasnt been used for a while, been floating around my desktop on and off, im sure it works. I also have a pentium 120, and a pentium 133 that are on my window sil. I have a burnt out p3 550, too many network cards, (3com) 10/100 small. and a p3 1 ghz 1000/256/133/ SL4C8
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

OH and 2 intel overdrive cpu's that are tacked up on the corkscrew billboard at my desk! one socket 3 and other is socket5/7 :lol:
:lol: :lol: :lol: :lol:
InactiveX
BeOS Forever
Posts: 1385
Joined: Wed Jul 24, 2002 8:25 am
Location: UK

Post by InactiveX »

486SX-25
486DX-33
Pentium 90
Pentium 100
K6-2 400
Celeron 433
Celeron 333
PentiumII 350
Loads of old motherboards (soon to be turned into hardware firewall/routers and sold for $$$)
A plethora of network cards, modems, etc.
Various old RAM chips
Atari ST
Sinclair ZX81
Sinclair ZX Spectrum+
BBC Micro Model B (My favourite computer ever - apart from my BP6)
8)
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

the pentium over drive's sound good if they are functional CPU's.. if they have the tack hole i nthem i dont want, i mainly want the socket5/7 OD chip,

gabumon wrote:OH and 2 intel overdrive cpu's that are tacked up on the corkscrew billboard at my desk! one socket 3 and other is socket5/7 :lol:
:lol: :lol: :lol: :lol:
ok the following i like and would buy,
Atari ST
Sinclair ZX81
Sinclair ZX Spectrum+
PentiumII 350
K6-2 400


Kuun
InactiveX wrote:486SX-25
486DX-33
Pentium 90
Pentium 100
K6-2 400
Celeron 433
Celeron 333
PentiumII 350
Loads of old motherboards (soon to be turned into hardware firewall/routers and sold for $$$)
A plethora of network cards, modems, etc.
Various old RAM chips
Atari ST
Sinclair ZX81
Sinclair ZX Spectrum+
BBC Micro Model B (My favourite computer ever - apart from my BP6)
8)
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

if you are interested I have 486DX2 66MHz working CPU - just like 1 month ago we have upgraded.. :lol: :lol: :lol: to pentium S 166@225MHz :) (took from my boss, cause he wanted to throw it to the garbage :)))

and also some old simms...

well working mobo from 486 and an 8X CDROM :D

failing modem 56K... :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

notice:

of al lthe CPU's i have, i dont want more of them

i have most of the 486 line

and overdrive, PPRO, XEON and the DX4100 by intel are the main "older" cpu's im after atm

any of the 5x86 4x86 (k5 or k4) series i would like

cyrix is only if it's cheap :P

the DX and SX series are not rare, i dont want them, i already ahve enough, however OVerdrive and PPRo's and Xeons are rare

Kuun
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

Well, I had two PPro200MMX with 512kb cache like 3-4 months ago, but I sold them to other collectionists... :)

Well, have a good luck for them! :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

I have two pentium pros in my server im about to sell (Intel providence server board with two ppro 200's with 512K cache, I know they werent matching, but they have been used nonstop the 8 months I use dthem to work, and it still works, just upgraded to a bp6
and the overdrive cpu was working, but dunno know, and no there was not a tack hole in the cpu, it may have a bent pin or 2, or 20
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

ooooohhhhh

if you could halfarse straiten the pins i'd take the Overdrive CPU, make sure it works too (if you can)

and your selling a dual PPRO serveR? oohhhh i want :)

are ppro's OC'able?

Kuun
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

Never tried to overclock the fossil server board, its an intel pr440fx board, I also have four 128mb modules on it (Buffered memory) And I took a look @ the intel Overdrive cpu, multiple bent pins, and I Believe it was a 166
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

how badly bent?

i've bent alot of pins on my old 200MMX and my first CPU ever the P120

they both work perfectly to this day

Kuun
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

kuun wrote:ooooohhhhh

if you could halfarse straiten the pins i'd take the Overdrive CPU, make sure it works too (if you can)

and your selling a dual PPRO serveR? oohhhh i want :)

are ppro's OC'able?

Kuun
YES! they are overclockable and pretty well :) I saw 200MHz PPros hitting in the range of 250-300MHz with voltage like 3.3V - that will depend on the board I guess :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

hmm

i would seriously like a dual ppro server,

it'd make a great NAT/dialup/firewall machine and run seti at the same time

i imagine if i can get a p200mmx to 262 just fine im sure a ppro200 can make it to 266

i still want the server :)

Kuun
InactiveX
BeOS Forever
Posts: 1385
Joined: Wed Jul 24, 2002 8:25 am
Location: UK

Post by InactiveX »

I OCed my old P200MMX to 290MHz.

It's still running in a friends machine.
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

How much do you wanna shell out for the pr440fx board with two 200's with 512K cache and 512mb ram (I can easily get $30 ~ 40 a stick off ebay for the memory since its buffered ram)
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

i dont know

if it takes dimms i have plenty of dimms to get it upto 256

but, the board is old and considering i got my own ppro 180mhz cpu for $7 i wouldnt shell out much

give me the somplete specs and i'll decide from there what'd i shell out
BTW i will pay shipping

Kuun
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

the board dosent work with unbufferd memory modules, i already tried that long time ago. ill be posting it on ebay soon.....
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

what would you take for it?
Blueneko
aka Gabumon
Posts: 419
Joined: Thu Sep 05, 2002 12:21 am
Location: Florida
Contact:

Post by Blueneko »

board memory and cpus?
(yes with heatsinks and fan)
$175 O.B.O
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

ouch,

i paid less than that for my Bp6 w/ 384MB ram and both 500mhz CPU's w/ heatsinks+fans

Kuun
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

so no one has cpu's they arent using?

Gubomon i want that overdrive CPU, acually i might take both

anyhow

i have aquired a AMD 500mhz t-bird a 700 mhz t-bird and a 1ghz duron all for $53 shipped

Kuun
Post Reply