FS: BP6 with 2 x 366Mhz and 256MB. 2 x Alpha PAL6035

For sale ads / Stuff wanted ads
Post Reply
Bobert
Posts: 10
Joined: Sat Sep 03, 2005 7:54 am
Location: North Carolina

FS: BP6 with 2 x 366Mhz and 256MB. 2 x Alpha PAL6035

Post by Bobert » Sat Sep 03, 2005 8:49 am

***Please read first: I have been testing the board today, and can't seem to get it to pass memtest86 when overclocked. So I'm not going to sell it. Make an offer if you like, or I might part it out later on. The memory is still good, and I've even tried a known good ECC module and I still get errors. Anyways memtest86 does pass at stock speed 366Mhz however.


1 Abit BP6 Motherboard Rev. 1.0
2 Celeron 366Mhz processors (Malaysia). both lapped flat
2 Crucial CL2 128 MB Ram modules
2 Alpha PAL6035 heatsinks with shrouds
2 60mm-->80mm fan adapters
2 YS Tech 80mm fans (FD1281255B-2A) rated ~ 38cfm
1 "Big blue" heatsink on BX chipset .."little green" has been replaced :D
1 50mm Vantec fan on Big blue
Original BP6 User's Manual, CD ROM driver disk BX-1.60E, Ultra ATA/66 driver disk ver. 1.00
Original Abit motherboard box, and Alpha boxes (Alpha decals included).

Extra: 1 Celeron 366Mhz processor lapped (L2 cache errors @ 550 Mhz, does overclock ~530Mhz without errors)

email: dualsmp@alltel.net

Photo below:

Image
Last edited by Bobert on Thu Sep 08, 2005 3:09 pm, edited 2 times in total.

jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Over-clock?

Post by jaybird » Tue Sep 06, 2005 12:28 pm

How fast (stable) does this combination go? Does it do 550?

regards,

jaybird

Bobert
Posts: 10
Joined: Sat Sep 03, 2005 7:54 am
Location: North Carolina

Post by Bobert » Tue Sep 06, 2005 3:19 pm

Yes the 2 processors on the board comfortably overclock to 550Mhz.

InactiveX
BeOS Forever
Posts: 1385
Joined: Wed Jul 24, 2002 8:25 am
Location: UK

Post by InactiveX » Wed Sep 07, 2005 10:14 am

I like that blue HSF!

Good luck with the sale.
Like BP6.com? Not a member?
Then why the hell not? It's great!
-> BP6.com Membership <-

jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

BP6, how much?

Post by jaybird » Thu Sep 08, 2005 8:41 am

What are you asking for the system as shown?

Regards,

jaybird

Bobert
Posts: 10
Joined: Sat Sep 03, 2005 7:54 am
Location: North Carolina

Post by Bobert » Thu Sep 08, 2005 3:10 pm

I've updated first post please read.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest