BP6 Can't boot: NTLDR not found

Post Reply
Posts: 604
Joined: Wed Jul 24, 2002 11:15 pm
Location: Chicago USA

Post by RRLedford »

Get your system to boot from a floppy 1st. Make a new Win98 boot disk by swapping the BP6 floppy drive into your other system, temporarily.

Make sure the drive/floppy combo from the BP6 boots your good system. Make the floppy write protected & then take drive/floppy combo back to the BP6. It will boot the BP6.

After it boots the BP6, see if the win98 CDROM drivers initialized your CDROM drive(s). If so, try to read the CDROM disk & install the OS.
Post Reply