I have a bp6 working as a filesesrver, then out of the blue it just died on me the other day. I'm aware of the bad cap problem these boards have so I checked all the caps and they looked fine. Me scratches head. I figured I'd remove everything from the board and reseat it. When I removed the heatsinks I noticed that the plastic covering the caps, those just 'north' of the processors, had been slightly shaved, exposing the bare metal underneath. Ok, I thought, soldering time! Resoldered the 6 caps plus the black one in between the sockets, as I've read somewhere it often causes problems, in total seven caps resoldered.
Well, let's hook it up to power and see what happens. Wtf?!? No beep, no nothing only silence. Well sort of silence, as all the fans and such spin up as they should, but the board seems dead. Tried reseting the CMOS, reboot and... nothing!
Any suggestions? I so want my fileserver back online
PekkerCadette out.
ARGH!! BP6 dead...
-
- Posts: 4
- Joined: Fri May 07, 2004 3:40 pm
- Contact:
did you try another PSu - maybe it does not supply some line, like 5V or so... I don't know...
Dual C366@550MHz 1.90V (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
-
- Posts: 4
- Joined: Fri May 07, 2004 3:40 pm
- Contact:
Ehmm, well, yes and no. I had a 300W before (last year), now I have a 350W PSU. The PSU is a ATX 2.03 model,so it should do fine. I've tried it in another rig and it works just fine.
Been reading up a bit here, and it seams the dust-buildup can be a problem, but my board is not dusty at all so I don't think it's that.
PekkerCadette out.
Been reading up a bit here, and it seams the dust-buildup can be a problem, but my board is not dusty at all so I don't think it's that.
PekkerCadette out.
-
- Posts: 4
- Joined: Fri May 07, 2004 3:40 pm
- Contact: