Freezing after bootup.

Post Reply
Wolfram
Posts: 401
Joined: Tue Jul 30, 2002 3:19 am
Location: Germany

Post by Wolfram » Wed Jun 04, 2003 3:08 am

Did that machine work with another operating system before? Did that use SMP?

BIOS: ACPI or not? MPS version set to 1.1 or 1.4?
Windows: Device Manager/Computer: ACPI/Standard MPS/Standard HAL installed?

Do you use Windows 2003 server (which I don´t know) like you said in your first post or 2000?

I´m just guessing btw, it could of course also be an overheating issue or a defective PSU or memory stick.
BP6, RU BIOS, XP SP3, ACPI, 2x366@523(1,95V), Pentalpha HS + 1x 12cm fan @5V, 768MB, Powercolor Geforce 3, RTL8139D NIC, Terratec EWS64L, Samsung M40 80GB (2,5''), LiteOn CDRW

Derek
Site Admin
Posts: 2480
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek » Wed Jun 04, 2003 10:47 am

It could also be corrupt software somewhere on the computer, most likely a driver.
-Derek

Derek
Site Admin
Posts: 2480
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek » Wed Jun 04, 2003 10:50 am

Edit: Posts split from "BP6 Stability Issues" FAQ.
-Derek

Derek
Site Admin
Posts: 2480
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Re: I found something

Post by Derek » Fri Jun 06, 2003 10:44 am

John_Tapia wrote:the temperature of the motherboard is stating 270F ???????
I think you had better check the capacitors again ;)

Try pointing a fan at the case (with the sides off) and see if the extra cooling helps the computer.

kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun » Fri Jun 06, 2003 2:49 pm

270?

isn't that like, beyond the 80C?

sheesh if it were that hot, dude it'd be melting stuff

the caps can only take 85C
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests