More High Sandra Memory results

Post Reply
loophole
Posts: 74
Joined: Wed Jul 24, 2002 9:09 pm
Location: Australia
Contact:

More High Sandra Memory results

Post by loophole » Fri May 30, 2003 2:24 am

Using H.Oda's WPCredit utility for Windows, and setting the following options:
* host bus fast data ready - register 52;
* leadoff command timing - register 76;
* DRAM idle timer set to 0 - register 78.

Using SiSoft Sandra 2001te I got the highest memory results I've ever gotten so I thought I'd post them here.

I'm running two celeron 300A at 495 (4.5 x 110) and 2.1v with the memory set as CAS 2.

Just thought these results were pretty cool - shows the BX can still give younger chipsets a run for their money.

Keep on overclocking,
loophole.
You do not have the required permissions to view the files attached to this post.
Still kicking along with the Abit BP6 :-)

hyperspace
Board Admin
Posts: 1394
Joined: Wed Jul 24, 2002 7:39 am
Location: Lincoln, NE USA
Contact:

Post by hyperspace » Fri May 30, 2003 7:46 pm

Very Impressive!
Quantum WormHole

Image
lost in hypertime...

Wolfram
Posts: 401
Joined: Tue Jul 30, 2002 3:19 am
Location: Germany

Post by Wolfram » Wed Jun 04, 2003 2:56 am

Indeed. I only get 343/344 ALU/FPU bandwidth with FSB95 and CAS2, without those WPCredit tweaks. But that´s with Sandra 2003, and I think this version gives you lower memory scores on a BP6 than Sandra 2001.
BP6, RU BIOS, XP SP3, ACPI, 2x366@523(1,95V), Pentalpha HS + 1x 12cm fan @5V, 768MB, Powercolor Geforce 3, RTL8139D NIC, Terratec EWS64L, Samsung M40 80GB (2,5''), LiteOn CDRW

loophole
Posts: 74
Joined: Wed Jul 24, 2002 9:09 pm
Location: Australia
Contact:

Post by loophole » Tue Jun 17, 2003 5:02 am

Yeah, I remember reading that you can't compare different Sandra scores worth a grain of salt. I should probably get around to getting 2003, but all I do under Windows is just play games (I mean test the stability of my machine :-) -> the real work happens under Linux.
Still kicking along with the Abit BP6 :-)

the_flames
Posts: 106
Joined: Thu Oct 10, 2002 11:50 am
Location: Yorkshire UK
Contact:

Post by the_flames » Wed Jul 16, 2003 9:32 am

were can you get Sandra from ???
do you have to pay for it ???
if so is there a trial ver???

an i using to many question marks ??? :)

jaybird
Posts: 301
Joined: Tue Jul 30, 2002 9:21 pm

Sandra

Post by jaybird » Wed Jul 16, 2003 9:47 pm

I also would like an older trial version of Sandra(lost mine in HD crash!)

Just for "grinns" :wink: Would like to compair with my old dual 366's @ 571mhz scores and my present PIII 1100 @ 110fsb!

can anyone help?

Regards,

jaybird

loophole
Posts: 74
Joined: Wed Jul 24, 2002 9:09 pm
Location: Australia
Contact:

Post by loophole » Thu Jul 17, 2003 11:10 pm

You can download SiSoft Sandra from here:
http://www.3bsoftware.com/downloads/

Hope you have fun with it...
Still kicking along with the Abit BP6 :-)

the_flames
Posts: 106
Joined: Thu Oct 10, 2002 11:50 am
Location: Yorkshire UK
Contact:

Post by the_flames » Sat Jul 19, 2003 7:26 pm

thank's :)

iSDn
Posts: 99
Joined: Fri Aug 09, 2002 6:36 am

Post by iSDn » Wed Oct 15, 2003 3:23 am

Please can any1 explain how to use WPCredit to make these changes ???

Thanks..

Wolfram
Posts: 401
Joined: Tue Jul 30, 2002 3:19 am
Location: Germany

Post by Wolfram » Mon Oct 20, 2003 1:51 pm

Download WPCREdit and WPCRSet. Edit is for on-the-fly-testing, Set for loading a driver at startup that sets the desired values.

Edit will automatically choose the correct configuration for a BP6 (IIRC). You can edit the registers in a binary/hex editor. Then you start "Installdd" that comes with Set and installs the device driver. Enter the values you changed and save them, so they´ll be restored after reboot.

If your system hangs at bootup, you entered the wrong values... but you still can uninstall the driver in safe mode.
BP6, RU BIOS, XP SP3, ACPI, 2x366@523(1,95V), Pentalpha HS + 1x 12cm fan @5V, 768MB, Powercolor Geforce 3, RTL8139D NIC, Terratec EWS64L, Samsung M40 80GB (2,5''), LiteOn CDRW

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests