You've got the same CPU's I used to use. Never could get them to run over 85 stable.
http://processorfinder.intel.com/script ... orSpd=5028
When you say "4x100" did you mean you set the FSB to 100? Remember the multiplier is locked on these CPU's. Whats your AGP divider set to?
Come on guys,any ideas, lets get this board up and running for the 28th.
OHKAY.... WTF!?! This thing's posessed.
hehehe... The other friend I have had Celeron 400 which rocked on Q3 Arena on 600MHz even with aluminum heatsink and colder weather
Dual C366@550MHz 1.90V (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
Set your AGP to 2:3. Make sure nothing is on the Highpoint controller (if possible use the RU bios without the Highpoint) and then try uping the FSB in small increments. You may also want to give the Celerons a little more voltage but be very careful. If it starts to get unstable bring the FSB/voltage back a touch and then you know your limit. Make sure your coolings up to scratch.