OHKAY.... WTF!?! This thing's posessed.

Post Reply
onelegdis
Posts: 274
Joined: Thu Jul 25, 2002 6:52 pm
Location: London UK

Post by onelegdis »

You've got the same CPU's I used to use. Never could get them to run over 85 stable.

http://processorfinder.intel.com/script ... orSpd=5028

When you say "4x100" did you mean you set the FSB to 100? Remember the multiplier is locked on these CPU's. Whats your AGP divider set to?

Come on guys,any ideas, lets get this board up and running for the 28th.
Derek
Site Admin
Posts: 2489
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek »

Like onelegdis said the multiplier is locked on the processor, so the computer actually reads 6 x 100FSB (in your case).
-Derek
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

hehehe... The other friend I have had Celeron 400 which rocked on Q3 Arena on 600MHz even with aluminum heatsink and colder weather :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
onelegdis
Posts: 274
Joined: Thu Jul 25, 2002 6:52 pm
Location: London UK

Post by onelegdis »

Set your AGP to 2:3. Make sure nothing is on the Highpoint controller (if possible use the RU bios without the Highpoint) and then try uping the FSB in small increments. You may also want to give the Celerons a little more voltage but be very careful. If it starts to get unstable bring the FSB/voltage back a touch and then you know your limit. Make sure your coolings up to scratch.
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

NO
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
Post Reply