Motherboard Monitor 5.3.5.0 Released

Moderator: News Team

Post Reply
Derek
Site Admin
Posts: 2489
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Motherboard Monitor 5.3.5.0 Released

Post by Derek »

Click here to download: http://www.bp6.com/mbm_bp6_com.php
Alex wrote:added:
• Winbond W83647HF (thank you Winbond)
• Increased support for the EPIA boards (VT1211) thank you VIA Germany and ACME.de
• Configuration wizard, the reason for the increase in size of the d/l
• Special dump on the system info tab used to add your board to the config wizard for other users.
• wm_pause and wm_resume message (see help file advanced - messages)
• Priority function added to the starter.dll
• SetPath function added to the starter.dll in case you plan on running it as a service and it has no access to HKEY_CURRENT_USER in the reg.
• 2nd CPU temp on GA-7DPXDW+ which uses 1 LM90 for 2 CPU's (big thanks to Tim South for keeping at it)
• templist.ini added, with this you can enter your own temp table, see the help file advanced section

Fixes:
• installer would always recommend C:\program files even if your program files was on another drive, this should be fixed
• autohide dashboard did not always work 100% when you had the dashboard set to start with MBM
• problem with e-mail test button
• dual monitor and OSD, the slided will now allow you to select a position on the left monitor
• problem with ADM1030 fan speed (Charles Xuereb)
• the LPC47xxx group of fans should respond better to the do not reset sensor chip option
• ITE range of sensors fan sensor 3 dividor problem fixed (thanks Anthony Smith)

Changes:
• installer offers to start MBM after install
• installer will offer (checked) to start the help file if it's a new install
• installer will offer (unchecked) to start the help file if it's an update install
• ICH4-M auto enabled
• English language file (thanks Wesley Chung)
• fantemplist.ini has been changed, you now need to make a file for each fan you want to base a a temp sensor on, so fantemplist1.ini if you want to use fan1, fantemplist2.ini if you want to use fan 2
• fantemplist increased to 16

Voltage.ini
• GA-8IPE1000Pro
• SOYO DRAGON KT400 (VTech)
• GA-8KNXP (MeanGene)
• EPoX 8RDA/8RDA (Valery Shatunov)
• Elite L7S7A2 (Willem Schaaij)
• Biostar M7VIG PRO (Chris Christo)
• Asus A7V8X-X (Willem Schaaij)
Post Reply