So Far So Good: 1.4GHz Tualatin on a BP6
Moderator: News Team
Dual Tualatins do work on BX boards
http://tipperlinne.com/p2b-dsvtt
"Vtt Adjustment on the Asus P2B-DS (aka the Right way to run Tualatin CPUs on 440BX Mainboards)"
"The modified P2B-DS successfully ran memtest86 for 48 hours without error at 140Mhz FSB - this appears to be the upper FSB limit for stability on the P2B-DS."
"Vtt Adjustment on the Asus P2B-DS (aka the Right way to run Tualatin CPUs on 440BX Mainboards)"
"The modified P2B-DS successfully ran memtest86 for 48 hours without error at 140Mhz FSB - this appears to be the upper FSB limit for stability on the P2B-DS."
You do not have the required permissions to view the files attached to this post.
Well just got my neo and plugged that in to the socket, lin lin into neo and 1.2 int lin lin...power on no beeps no video nada nothing. So any tips yoshiro or ideas any one. pretty much a newbie so not sure what to do...I tried both sockets on mb same results. now I have just 1 cele 400 in to get this message out.
Thanks
Thanks
cabbit: This post may have the information you're looking for:
http://www.bp6.com/board/viewtopic.php?t=1134
http://www.bp6.com/board/viewtopic.php?t=1134
-Derek
derek
you need to get someone to do some serious testing in this matter
and find what will actually work and where to get it
this will help people better so they have a guide like the p3mod guide
you need to get someone to do some serious testing in this matter
and find what will actually work and where to get it
this will help people better so they have a guide like the p3mod guide
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
Re: So Far So Good: 1.4GHz Tualatin on a BP6
Welcome, dalamar!dalamar wrote:New member, first post!Derek wrote:"yoshihiro" has successfully installed and is running one Celeron Tualatin (FC-PGA2) 1.4GHz processor on his BP6 motherboard without any soldering!
See his Album for pictures:
http://www.bp6.com/board/album_personal ... er_id=1651
See his post for more details:
http://www.bp6.com/board/viewtopic.php?t=1134
Hopefully we will have the same success with Pentium3 Tualatin processors.
Just wanted to let you all know that I just got this same mod working.
Check the Tualatin 1.4 Sticky in the overclocking forum for all the details.
That's pretty slick. Hope to see some more posts
hey
i wonder why some can make this mod work yet others cant... what are the variables?
derek?!
i wonder why some can make this mod work yet others cant... what are the variables?
derek?!
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
Isn't the Lin Lin enought
Hi, I recently came a across an old computer with an 810 chipset PPGA.. I ordered the lin lin adapter and a 1.3 tualatin celeron.
Can't I go right from PPGA to FC-PGA2? Shouldn't I just have to set the vcore and bus speed on the lin lin?
Can't I go right from PPGA to FC-PGA2? Shouldn't I just have to set the vcore and bus speed on the lin lin?
Hi ntloser,
can´t really help you with the lin lin. But IIRC boards with the 810 chipset should support PPGA and FCPGA CPUs. So if you have a FCPGA -> FCPGA2 adaptor, you shouldn´t need another one.
can´t really help you with the lin lin. But IIRC boards with the 810 chipset should support PPGA and FCPGA CPUs. So if you have a FCPGA -> FCPGA2 adaptor, you shouldn´t need another one.
BP6, RU BIOS, XP SP3, ACPI, 2x366@523(1,95V), Pentalpha HS + 1x 12cm fan @5V, 768MB, Powercolor Geforce 3, RTL8139D NIC, Terratec EWS64L, Samsung M40 80GB (2,5''), LiteOn CDRW
The FCPGA2 spec is a bit vague. Some are pin compatible with FCPGA, some aren't, eg my PIII933 is FCPGA2 with IHS, but it fits on an FCPGA board. Laater FCPGA2 chips have a different pin-out.
Like BP6.com? Not a member?
Then why the hell not? It's great!
-> BP6.com Membership <-
Then why the hell not? It's great!
-> BP6.com Membership <-