BP6.Com

http://cgi.ebay.com/ABIT-VP6-MOTHERBOARD-DUAL-FC-PGA-SOCKET-FOR-PARTS-AS-IS_W0QQitemZ6852417825QQcategoryZ44941QQrdZ1QQcmdZViewItem there are other dual Piii mobos that will work as well as the VP6 and if you're adventurous, http://cgi.ebay.com/2-TWO-Abit-VP6-Dual-Socket-370-Motherboards-Non-Working...

already not listed.
they got a 2179649 but no mention of rebates.

Good call. The flat plastic lever I got on one of my boards is also extremely inacessible so I have to use a tool to lift it so I guess the effect is the same. seeing as some1 else re-activated this thread ... purrkur, you original linux listings of voltages, showed the VTT with the CPU voltages. (...

I haven't got 'never feed trolls' in my MP3 collection, Yet.

must buy some more cd's

check the crappy MP3 player, and see if it is compliant or actually. check your computer system USB devices, and see if you have USB 1 ports or a USB 2 port further, is the USB 2 an overlay for all the USB 1 ports or does it apply to one of the USB ports. I've never asked or experimented.... but unt...

check the blue thingy (heat ?) in the middle of the socket.
I have one that is broken in two, and the board only works single cpu....
might be something in or around the second socket that has kaputted...

you can 'raid' in win2k not proper raid, but windows system software raid there's raid 0,1,5 and some other one too you can have 2 x 10gb as one 10gb drive in mirror mode 2 x 10gb as 20gb in stripe mode, plus windows, i think sort of extends accross. you can have 4 x 10gb as 1 x 10gb 2 as mirror and...

I want to feed the cold water to a holding tank where it mixes, so that it is cool water, which is fed into each boxes local water supply.

so each box can be independent, but can be piped into active colder cooling too

firefox and thunderbird are part of Mozilla
I think it's a dot org but
http://www.mozilla.com/
seems to work

I'd love a dual water cooling system. semi-super cooling system to keep the fish-tank reservoir at a nice even 15 degrees. then I'd clock my BP6's to the max, 78-80 fsb no prob cooling pipes on northbridge, cpus, vga, anything I'd get a water pipe to sit on. it's just that the boxen would be so heav...

72fsb is only 576mhz
75 gives you 600
you didn't mention what voltage you are running the cpus at. at least 2.10v I'd say
much voltage and OC'ing needs much cooling.

check your Voltages setting Voltage Configuration will be set at W83782D Standard so it will be showing the 1.50v VTT rail - the one affected by the 100uF capacitor. if you set it to W83782D Abit BP6 it will show the two CPU voltage settings. this is nice, but it's more important, with bad caps, to ...

you gots to state all the bleeding obvious bits
'cos he didn't say what he had done / tried

http://computers.listings.ebay.com/Inte ... ngItemList

anything with the PPGA, FSB @ 66
usually about the 400-533 range.

make sure you have the BIOS set to boot from the CD-Rom
before it boots from the IDE

if you have activated the windows on the Dell, then you won't be able to do it again on the bp6.

if your Dell didn't need activation, you might be able to get away with it.
like with a notebook, comes pre-activated.

( psst, I was never here! )

the compressor is the heat exchanger moisture sucking bit, it goes outside.....

the cold air output would be dehumidified and dry and cold, and non-moisture producing.
it might get to be moisture promoting due to the coldness and condensation, if you turn it up too far.

possibly heat.
with only 32mg of ram, it's more likely to be an overlay texture render thingy where you don't have enough video card memory to properly display all the game goodness you need.

there's a limitation on what they supported in the new style OS.
if they supported everything ISA, the .inf files would be huge.

It's a BIOS display thing. wouldn't worry about it.
MBM will show the 'correct' speed in windows.

plus, you will be hard to get a useable stable system much past 78 FSB without serious cooling.

http://www.bp6.com/board/viewtopic.php?t=2541&highlight=wind+core http://www.bp6.com/board/viewtopic.php?t=1698&highlight=wind+core the coils would be near the caps for voltage regulation. if they don't work, then voltages would be flaky. you got MBM installed yet ? but check the voltages in BIOS sc...

(solder) it's a voltage regulator coil thingy and there has been messages about un-soldering them and re-winding the wire about the coil... with the extremes of heat they get, any little bug walking nearby would probably fry up nicely, and quickly. though it's probably the lacquer put around the met...

the Media Center shows my plain INtel 3.0ghz 478 pin as a dual system.
a bp6 is a true dual cpu, the Intel 3.0ghz is a "dual" cpu

finally, an answer, of no help
after two years.

when winter comes back, I might start those 4 up again, to see how they boinc.
but the power costs versus cpu rating hasn't been worth it as much as against my 2.4b 2.4c and now two dual 2.4 xeons

can someone else, besides me, count the number of posts on this page and tell me how webtrakker has a total of 2 posts for his three replies ?