Search found 508 matches

by BCN
Wed Dec 04, 2002 11:12 am
Forum: Overclocking / CPU Database
Topic: Do I have this right?
Replies: 16
Views: 4397

I think that's all htat you need for the beginning, but it will probably will not be completely stable with two of the P3.... :( so later on eventually you'll have to change the caps. I have just bought the soldering iron, solder, stand for it, desoldering iron, so this weekend I plan to read on the...
by BCN
Thu Nov 28, 2002 9:34 pm
Forum: General Discussion
Topic: Mendocino 1300 PPGA (2 cpu) What Necessary ?? Help
Replies: 6
Views: 5296

and if to add about voltages... :) my dual 366 at the this speed posts at 1.55V :)

so even if it does not support 1.5V CPU's, you can put 1.5V in BIOS and you are fine.
by BCN
Thu Nov 28, 2002 9:48 am
Forum: General Discussion
Topic: RAM recognition problem
Replies: 8
Views: 7101

BP6 recognizes only the maximum 128MB per memory bank and it HAS to be in 8 chips, so 256MB modules have to be doublesided with 16 chips in total. :)
by BCN
Tue Nov 26, 2002 8:41 pm
Forum: General Discussion
Topic: 512 Mb low-density sdram?
Replies: 5
Views: 5686

the limit is 32Mx64 density RAM without ECC or 32Mx72 with ECC 256MB module and it has to be DOUBLESIDED! with 16 mem-chips in total - 8 hcips on each side - otherwise if you put 512MB doublesided module, at the best it will be recognized as 256MB

BP6 recognizes ONLY 128MB per one bank
by BCN
Tue Nov 26, 2002 8:24 pm
Forum: General Discussion
Topic: BP6 NO VIDEO / NO ALARM BEEPS... when turned on
Replies: 28
Views: 12927

Well... I am having the same problem, but CMOS did not help me... :( Maybe I will try it again one day... :D Otherwise the board works fine (except one problem about which I will post in another post) and I did not have time to care recently and also my PC was working 24/7 for the last year... :) - ...
by BCN
Tue Nov 26, 2002 7:54 pm
Forum: General Discussion
Topic: how do you get the hpt366 blue screen to disappear
Replies: 1
Views: 2165

during install load 1.28 driver - this will work and load it twice. after install use 1.25 driver, cause 1.28 driver f..ks the HDD before the restart or powerdown... :( If you have maxtor drive, so go and buy some decent promise controller, because probably HPT might trash your drive... :( I had 2 B...
by BCN
Tue Nov 26, 2002 7:48 pm
Forum: General Discussion
Topic: nOOb question
Replies: 2
Views: 2860

it may be any of them, but they tell that usually you are not able to run EB at more than around 110FSB without the nod and then after usually at 124FSB, so you underclock it anyway.

Use E type, cause this way you'll overclock it a bit :)
by BCN
Tue Nov 26, 2002 10:03 am
Forum: General Discussion
Topic: What Are My Options??
Replies: 2
Views: 2779

the memory you can buy at www.crucial.com (I got the memory on the second buissness day - tomorrow...) with their memory selector for upgrades. there you will get the 256MB modules the BP& can support - they will be with 16 chips and dual banks. the mobo does not recognize new 256mb modules as 256, ...