Search found 508 matches

by BCN
Sat Mar 26, 2005 9:33 am
Forum: General Discussion
Topic: hard drive light always on?
Replies: 41
Views: 47797

hey! why don't you try swapping he pins of the HDD led, which you connect to your mobo, eventhough you might be completely sure you connected it right.... the thing is LED gets ON when you connect it backwords, if you understand what i mean. there is no more problem there, once it happened to me lon...
by BCN
Wed Mar 23, 2005 10:56 am
Forum: General Discussion
Topic: What do you do with your BP6?
Replies: 11
Views: 16626

now it sit doing nothing as it still awaits for a recap :)
by BCN
Wed Mar 23, 2005 10:52 am
Forum: Overclocking / CPU Database
Topic: dual 433@488MHz/128kB/75MHz/2.0V, can it be more overclocked
Replies: 4
Views: 9004

it depends on CPU also, cause I could POST 366Mhz at their default at 1.3V, though these chips would have done 550MHz at 1.9V though I had stable at 1.6V at 366Mhz. so it DEPENDS.
by BCN
Mon Mar 21, 2005 1:57 pm
Forum: Overclocking / CPU Database
Topic: Post your overclocking results!
Replies: 26
Views: 55812

366@550 is faster in overall and it will show on the benches and real life
by BCN
Mon Mar 21, 2005 5:44 am
Forum: Overclocking / CPU Database
Topic: @#$%*! Capacitors
Replies: 27
Views: 36026

No, I had leadtek vidcard. oh yeah, It is notorious that Gf2MX causes instability on BP6 :) yea, I know about that spread spectrum, but that is the only thing that helped me with gf2Mx on BP6, it did not influence omn overclocking at all - it just showed wrong the CPU speed in bios (more than it was...
by BCN
Sun Mar 20, 2005 5:43 pm
Forum: Overclocking / CPU Database
Topic: @#$%*! Capacitors
Replies: 27
Views: 36026

Oh, i have just noticed in your sig, that you are using GF2MX... well, be sure to put spread spectrum at 0.50 in BIOS - it helped me with that card on BP6. though when spread spectrum enabled bios won't report correctly your CPU speed as I recall when FSB range=66-100. if it does not very well, try ...
by BCN
Sun Mar 20, 2005 5:39 pm
Forum: Overclocking / CPU Database
Topic: @#$%*! Capacitors
Replies: 27
Views: 36026

instability happens, but I guess it is because it does not get all the 3.3V it needs. might be wrong
by BCN
Sun Mar 20, 2005 12:00 pm
Forum: Overclocking / CPU Database
Topic: Post your overclocking results!
Replies: 26
Views: 55812

Yes, cause you run them at 100MHz FSB at 550Mhz, where memmory runs at 100MHz also.
where 533MHz celerons are running on 66MHz FSB (mem - also)....
by BCN
Sat Mar 19, 2005 11:50 am
Forum: Off Topic
Topic: Escape From Neverland
Replies: 1
Views: 5356

hehehe :)
by BCN
Sat Mar 19, 2005 11:42 am
Forum: Overclocking / CPU Database
Topic: cooling the BX chipset - 3-wire fan???
Replies: 12
Views: 16655

change to ACPI Multiprocesor PC, be sure you have that also in BIOS.

that WOL connector is not for fan, it is for network card, for Wake On Lan, as I understand, for being able to power up your PC through the net.

Cheers!
by BCN
Thu Mar 17, 2005 8:55 am
Forum: Distributed Computing + Mining & Crypto
Topic: Hey fellers......
Replies: 7
Views: 21319

I just crunch and do not look :)
by BCN
Thu Mar 17, 2005 8:45 am
Forum: Software
Topic: Disable HPT completely ?
Replies: 7
Views: 12672

there is BP6 bios on the site without HPT bios, but windows would detect it anyway, so you need to disable it in windows.... that is disturbing, so that's what you may do....
by BCN
Tue Mar 15, 2005 9:38 am
Forum: General Discussion
Topic: Can I mix ECC and non ECC memory?
Replies: 5
Views: 8914

well, it says it accepts ECC in the manual as I remember, but I have never tried ECC and nonECC together...
by BCN
Mon Mar 14, 2005 8:19 pm
Forum: Overclocking / CPU Database
Topic: Bp6 un-modded limit
Replies: 36
Views: 47603

well, once I have drilled holes in some old drity duron heatsinkfan :) iyt is still there on the BX :)
by BCN
Mon Mar 14, 2005 5:30 am
Forum: General Discussion
Topic: Sent board back to abit...etd?
Replies: 28
Views: 38024

wow!
by BCN
Mon Mar 14, 2005 5:27 am
Forum: News & Announcements
Topic: Dual core Pentium 4 won't work on 925 & 915
Replies: 18
Views: 27188

well, at least they say it won´t, AMD does not say anything :)
by BCN
Sun Mar 13, 2005 5:41 pm
Forum: Overclocking / CPU Database
Topic: Bp6 un-modded limit
Replies: 36
Views: 47603

you would be able to run your 300 celerons at 450Mhz easily, maybe 504Mhz, which is quite possible, but cool your BX, cause it gets hot under SMP. You could get to 558MHz ant 124MHz FSB, but that would require an qffort and good BX cooling Yes it will work with XP. your 400 celerons would probably a...
by BCN
Sun Mar 13, 2005 12:39 pm
Forum: News & Announcements
Topic: VIA launches low power dual CPU mini-ITX server
Replies: 3
Views: 7982

http://www.overclockers.com/tips00740/

that is a good reflection on that... :D
by BCN
Sat Mar 12, 2005 5:45 pm
Forum: Overclocking / CPU Database
Topic: ZIF socket problem
Replies: 6
Views: 9750

you have your point here... time...
by BCN
Sat Mar 12, 2005 1:07 pm
Forum: Overclocking / CPU Database
Topic: What is the difference between there CPU designs?
Replies: 8
Views: 13286

to add to that, all tualatins (FCPGA2) are 0.13 process, and all the coppermines (FCPGA) are 0.18 process, as you will see there are some coppermines P3 at 1.13GHz.
by BCN
Sat Mar 12, 2005 9:24 am
Forum: Overclocking / CPU Database
Topic: What is the difference between there CPU designs?
Replies: 8
Views: 13286

P3 are FCPGA and tualatin core are FCPGA-2

No you cannot use P3 without mods on this board.
You may use Powerleap Neo S370 adapter for coppermine P3, though for using in dual mode, you need to mod the board ant the adapters. there are lots of info on that in the forums on this site.
by BCN
Fri Mar 11, 2005 8:58 pm
Forum: Off Topic
Topic: SMP Systems
Replies: 18
Views: 30007

hehehehehe.... :D
by BCN
Fri Mar 11, 2005 10:53 am
Forum: Classifieds
Topic: Evercool CUD-725CA heatsinkfans for sale
Replies: 0
Views: 11466

Evercool CUD-725CA heatsinkfans for sale

Hi guys! I am selling my 2 Evercool CUD-725CA heatsinkfans on ebay, so if you are interested in them for your BP6 then check them out: http://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&category=89185&item=5174144171&rd=1 http://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&category=89185&item=5174144341&rd=1 tha...
by BCN
Wed Mar 09, 2005 5:51 pm
Forum: Hardware
Topic: Dual GF6800U with 512mb on one PCB!!!
Replies: 7
Views: 19282

but the really good thing about this card is that you do not need any SLi capable chipset and you do not need to pay extra for that kind of board :) besides it will go faster surely. it is just SO HARDCORE :)
by BCN
Wed Mar 09, 2005 3:29 pm
Forum: Off Topic
Topic: SMP Systems
Replies: 18
Views: 30007

1 at the moment - just do not find any time to mod that BP6 for stability.... :(